Video Screen Options; Security Screen Options - Dell Latitude 7320 Detachable Service Manual

Option Description
Unobtrusive Allows you to select the option. When enabled, pressing Fn+F7 turns off all light and sound emissions in
Mode the system. To resume normal operation, press Fn+F7 again. This option is disabled by default.
Miscellaneous Allows you to enable or disable various on board devices:
Devices
● Enable Camera This option is enabled by default.
● Enable Secure Digital(SD) CardThis option is enabled by default.
● Secure Digital(SD) Card read only mode

Video screen options

Option Description
LCD Brightness Allows you to set the display brightness depending up on the power source (On Battery and On AC).
NOTE: The video setting will be visible only when a video card is installed into the system.

Security screen options

Option Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
By default, the drive will not have a password set.
System Allows you to set, change or delete the system password.
Password
By default, the drive will not have a password set.
Password Allows you to determine the minimum and maximum length of Administrator and System passwords.
Configuration
Password Bypass Allows you to disable or enable the permission to bypass the System and the Internal hard drive password,
when they are set. The options are:
● Disabled. This option is selected by default.
● Reboot bypass
Password Allows you to enable or disable permission to the System and Hard Drive passwords when the admin
Change password is set.
Allow Non-Admin Password Changes This option is selected by default.
UEFI Capsule
This option controls whether the system allows BIOS updates via UEFI capsule update packages.
Firmware
Enable UEFI Capsule Firmware Updates option is selected by default.
Updates
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST.
You can control whether the trusted platform module is visible to the operating system. The option is:
● TPM on This option is selected by default.
● Clear
● PPI Bypass for Disable Commands
● PPI Bypass for Clear Command" in TPM 2.0 Security.
NOTE: You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE: Password changes take effect immediately.
NOTE: Password changes take effect immediately.
NOTE: Disabling this option will block BIOS updates from services such as Microsoft Windows
Update and Linux Vendor Firmware Service (LVFS).
System setup 73