Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Topics:
•
Recommended tools
•
Screw list
•
Subscriber Identity Module (SIM) card
•
Display assembly
•
Solid-state drive
•
WWAN card
•
Speakers
•
Rear Camera
•
Microphone module
•
Front Camera
•
Kick stand
•
Kickstand Hinges
•
Docking connector
•
Hall sensor daughter board
•
Heat sink
•
System fan
•
Volume button daughter board
•
Power-button board
•
Fingerprint reader
•
Battery
•
System board
•
Smart card reader
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some systems have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Latitude 5520Precision 3560 screw list
Removing and installing components
2
9