Steps
1. Align and place the power-button board on the frame.
2. Replace the two screws (M1.6x1.5) that secure the power-button board to the frame.
3. Connect the power-button daughter board FPC and the fingerprint reader FFC to the power-button daughter board
Next steps
1. Install the
right system
2. Install the
WWAN
card.
3. Install the
display
assembly.
4. Install the
SIM
tray.
5. Follow the procedure in
Fingerprint reader
Removing the fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
tray.
3. Remove the
display
assembly.
4. Remove the
WWAN
card.
5. Remove the
right system
6. Remove
thepower-button board
About this task
The following images indicate the location of the fingerprint reader and provide a visual representation of the removal
procedure.
54
Removing and installing components
fan.
After working inside your
Before working inside your
fan.
computer.
computer.