Advanced Settings Screen - Briggs & Stratton Fortress 10kW Installation And Operation Manua

Advanced Settings Screen

Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items and/or to
change items, follow the instructions listed below.
NOTICE Advanced settings are critical to the operation of the unit. Careful consideration should be taken when
working in the Advanced Settings menu. Exercise caution when selecting and verifying parameters for the
generator and region where the generator is being operated. Confirm all settings before operating the generator
for the first time.
For advanced menu items, press and hold the left arrow, right arrow, and escape key
for additional key sequence. Follow the prompts as outlined below.
NOTICE In the Advanced Setting menu, a three button access code (left arrow, right arrow, and escape key
must be pressed once to enter the menu and again to change any setting. After each confirmation of a setting, the selection
will display solid for 2 seconds before moving to the next program item.
KW
or
HZ
or
PHASE
or
VOLTS
or
*ONLY APPLICABLE ON SOME MODELS
E-Governor
Check
or
SOFTWARE VERSION
DISPLAYED
30
KW
FLASHING
50/60 Hz
FLASHING
or
SINGLE
or
THREE
FLASHING
or
VOLTS
FLASHING
or
Stepper Motor
will sweep through throttle
range for dealer
visual verificatio
or
o k
o k
ok
o k
for 3 seconds or see pg. 29
o k
ok