Wireless Monitor (Optional) - Briggs & Stratton Fortress 10kW Installation And Operation Manua

Wireless Monitor (Optional)

The generator is supplied with a battery-powered, wireless
monitor.
The monitor communicates wirelessly with the generator
control panel. The monitor may be placed in a suitable
location in the home. The system has a line-of-sight range
of about 200 feet, but this distance will decrease if the
signal has to pass through walls or other objects.
The wireless monitor communicates with the generator,
every 10 minutes and will display the status via LED lights
on the front of the monitor.
A
B
C
D
34
generator ready
generator power
service needed
system update
generator systems
DEALER NAME
DEALER PHONE
Compare the illustration below with your monitor to
familiarize yourself with these important components.
• Generator Ready (A) - Green LED
• Generator Power (B) - Green LED
• Service Needed (C) - Red LED
• System Update (D) - Press for current system
update with generator.
• Service code descriptions (E) - Name and number
of flashes are listed on the backside of the wireless
monitor.
• Battery Access Cover (F) - Record the dealer
name and phone number on the label provided.
Once opened, two AA batteries are installed in the
compartment (G)..
# of flashes service needed
1 low battery voltage 5 low frequency
2 low fluid level 6 engine overspeed
3 under/over voltage 7 high temperature
4 engine does not start 8 transfer switch
part #: 316196 fcc id: MCQ-XBS2C IC id: 1846A-XBS2C
F
E
G