Menu - Briggs & Stratton Fortress 10kW Installation And Operation Manua

Menu

The following chart shows the icons for the buttons that control the system control panel.
MENU
ESCAPE (EXIT)
RIGHT ARROW
LEFT ARROW
MANUAL MODE
OFF
AUTOMATIC MODE
The following chart describes key sequences for accessing different programming modes;
ENTER THE MENU (VIEW SETTINGS)
PRESS TO CONFIRM SELECTION WHEN PROGRAMMING.
RETURN TO LAST MENU ITEM
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
USED TO MANUALLY START THE GENERATOR. PRESS AND HOLD
BUTTON TO START THE GENERATOR.
TURNS OFF RUNNING GENERATOR, PREVENTS UNIT FROM STARTING,
AND RESETS ANY DETECTED FAULTS.
NORMAL OPERATING POSITION. PRESS AND HOLD BUTTON TO PUT
UNIT INTO
AUTOMATIC MODE. IF A UTILITY POWER OUTAGE IS SENSED, THE
SYSTEM WILL START THE GENERATOR. WHEN UTILITY POWER
IS RESTORED, AUTO LETS THE ENGINE STABILIZE INTERNAL
TEMPERATURES, SHUTS OFF THE GENERATOR, AND WAITS FOR THE
NEXT UTILITY POWER OUTAGE.
GENERAL PRESS AND HOLD [ARROW LEFT AND ARROW RIGHT] UNTIL
"GENERAL SET-UP" IS DISPLAYED TO ENTER THE PROGRAM
SET-UP
MODE.
ADVANCED PRESS AND HOLD [ARROW LEFT, ARROW RIGHT AND ESC] UNTIL
"ADVANCED SETTINGS" IS DISPLAYED OR PRESS AND HOLD
SETTINGS
EITHER [ARROW LEFT, ARROW RIGHT OR ESC] BUTTON UNTIL
"++1++" IS DISPLAYED ON THE DIGITAL DISPLAY. NEXT PRESS
AND HOLD A DIFFERENT KEY [ARROW LEFT, ARROW RIGHT OR
ESC] BUTTON UNTIL "++2++" IS DISPLAYED. FINALLY, PRESS
AND HOLD THE REMAINING BUTTON NOT SELECTED [ARROW
LEFT, ARROW RIGHT OR ESC] UNTIL "ADVANCED SETTINGS" IS
DISPLAYED.
WIRELESS PRESS AND HOLD [MENU AND ESC] FOR THREE SECONDS TO
ENTER THE WIRELESS LINKING MODE. (ONLY APPLICABLE ON
LINK MODE
SOME MODELS).
27