Installation & Usage; Battery Installation; Battery Charging; Using Ac/Dc Adaptor - SATO PV4 User Manual

3. Installation & Usage

3-1 Battery Installation

3-2 Battery Charging

3-2-1 Using AC/DC Adaptor

①
NOTE
Battery charging status descriptions are as follows.
LED
Red LED On
Green LED On
Red LED Blinking
Caution
Warning
Ver. 1.00
③
②
or Reinstall Battery
The printer may incur serious damage if the AC/DC adaptor provided by SATO
is not used. SATO is not legally liable for any such damages.
(The voltage and electrical current specifications of the printer and battery
charger must match.)
Turn off the power before charging the battery for the printer.
1) Insert the battery in the bottom of the
printer, and ensure that you align the
battery hook properly.
2) Push the battery into the slot until you
hear it "click" in place.
NOTE
As the battery is partially changed at the time of
purchase, charge the battery prior to product
use. (Use the AC/DC adaptor or the optional
1CH/4CH battery charger.)
1) Turn off the printer power.
2) Connect the power cord ② to the
AC/DC adaptor ① and then connect AC
power.
3) Open the external interface cap in the
direction of ③.
4) Connect the AC/DC adaptor to the power
connector.
Charge Status
Charging
Fully Charged
Error Replace
- 14 -
PV4
Charge Time
Within 6 hours