Using Peeler - SATO PV4 User Manual

3-4 Using Peeler

Ver. 1.00
NOTE
The specification of the paper inner diameter of
the standard paper disks are 19 mm (0.75 inch).
If you are using paper with a smaller inner
diameter, remove the paper disks as shown
below and replace it with the supplied 12 mm
(0.47 inch) paper disks.
1) Insert the paper after open the peeler as
shown.
2) Pull out the paper after close the peeler
as shown.
NOTE
Enable the peeler setting when using the peeler.
Refer to "Sensor setting" of "5. LCD Menu" to enable
peeler setting.
- 18 -
PV4