AR-3100/3200
User Guide
2 Get started
This chapter provides information about how to
install, connect and use your scanner to do your
work.
2.1 Installation
This section describes how to set up your scanner.
2.1.1 Set up your scanner
1. Plug the RJ45 connector into your scanner's RJ45
port, until you hear a click.
2. Connect the USB or the RS-232 connector to your
computer.
Note If you've purchased the power supply,
connect it to the RS-232 cable and the wall
outlet.
3. Turn on your computer. It detects your scanner
automatically.
4. To test your scanner, start a text processing
program like Notepad or Word. Scan a bar code
and see if the data can be sent to your computer.
If it's successful, you'll hear a beep and the bar
code data shows in the program.
4