Index; Rotary Cutter And Guillotine Cutter Installation - SATO TC408 User Manual

7. Index

Rotary Cutter and Guillotine Cutter Installation

Caution:
Blades inside cutters are quite sharp. To ensure your safety,
never attempt to insert fingers or objects into rotary cutter or
guillotine cutter. During all cutter operations including
installation, adjustment, or recovery from paper jam, please
power off printer first and unplug printer's power cord.
Refer to the following steps to install the cutter kit onto printer. Cutter kit
sample shown below is Rotary Cutter, whose installation steps are same as
for Guillotine Cutter:
1. Power off printer first. Open Top Access Door and push Head latch to
open printer module. Loose the screw which fixes plate of Front Cover.
73
TC Series - User's Manual