Bluetooth, Wireless Lan Connection - SATO PV4 User Manual

6. Peripherals Connection
This product can communicate with other devices via Bluetooth, Wireless LAN
communication and cable.

6-1 Bluetooth, Wireless LAN Connection

Ver. 1.00
1) The printer can be connected to devices
equipped with Bluetooth communication
capacity (PDAs, PCs, etc.).
2) Use the Bluetooth connection function
supported by the device to connect to the
printer.
The NFC tag built into the printer enables
automatic pairing with devices.
NOTE
Tap your host device to logo on the side of the
printer for NFC auto pairing
NOTE
The device must support NFC Auto Pairing.
It may display a message that the device
cannot be connected as NFC Auto Pairing is
supported up to the Bluetooth pairing and the
devices must be connected manually, but this is
normal.
3) The printer can be connected to other
stations, such as PDAs and PCs
supporting wireless LAN communication
in Ad-hoc mode, Soft AP mode and AP
in Infrastructure mode.
NOTE
Refer to the Bluetooth Wireless LAN Manual for
detailed information on its connection.
You can check the Bluetooth environment
(authentication, encryption, connection mode)
and the Wireless LAN environment (IP, SSID,
authentication, encryption) via the self-test
page.
- 28 -
PV4