3. Installation & Usage
3-1 Battery Installation
3-2 Battery Charging
3-2-1 Using AC/DC Adaptor
③
①
NOTE
Battery charging status descriptions are as follows.
LED
Red LED On
Green LED On
Red LED Blinking
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
1) Insert the battery in the bottom of the
printer, and ensure that you align the
battery hook properly.
2) Push the battery into the slot until you
hear it snap in place.
NOTE
Since the battery is partially changed at the time
of purchase, charge the battery prior to product
use. (Use the AC/DC adaptor or the optional
1CH/4CH battery charger.)
1) Turn off the printer power.
2) Connect the power cord ② to the
AC/DC adaptor ① and then connect AC
power.
3) Open the external interface cap in the
direction of ③.
②
4) Connect the AC/DC adaptor to the power
connector.
Charge Status
Charging
Fully Charged
Error Replace
or Reinstall Battery
V10 CONSUMIBLES S.L.
Charge Time
Within 3 hours