Self-Test - SATO PV4 User Manual

4. Self-Test

Run the self-test to check the setting information when you are setting up the printer for the
first time or if there is a problem.
If no issue is found with the printer after running the self-test, examine the other devices or
peripherals and software. This function is independent of such other devices and software.
• Self-Test Instructions
1) Turn the printer power on and go to the Tool > Print Printer Config menu on the LCD
2) Press the power button(Print) to run the self-test.
3) The printer settings information is printed on the first page, and the wireless interface
information is printed on the next page.
4) After the wireless interface information is printed, the self-test is automatically
terminated.
• Self-Test Sample
SATO PV4 CONFIGURATION
FIRMWARE VERSION : V01.00 STD 010118
EMULATION
PRINT DARKNESS
PRINT SPEED
TEAR OFF VALUE
TEAR OPTION
PRINT OFFSET
POWER-UP ACTION
MEDIA TYPE
SENSOR TYPE
PRINT METHOD
LABEL LENGTH
LABEL WIDTH
BAUD RATE
PARITY
DATA BIT(S)
STOP BIT(S)
HAND SHAKING
USB SERIAL NUMBER : 0000000000001
BPL-Z CODEPAGE
SLCS CODEPAGE
SLCS ICS
CONFIGURATION CONTROL STATUS
PRINT SPEED
PRINT DARKNESS
PRINT WIDTH
PRINT OFFSET
TEAR OFF
MEDIA TYPE
LANGUAGE
Ver. 1.00
: SLCS & BPL-Z & BPL-C
: 0/30
: 5 IPS
: +000 DOT
: TEAR-OFF
: +0000 DOT
: NO ACTION
: BLACKMARK MEDIA(REAR)
: REAR REFLECT
: DIRECT THERMAL
: 1013 DOT
: 576 DOT
: 115200
: NONE
: 8
: 1
: HARDWARE
: CP-850(SBE. USA-1 CHARSET)
: WCP1252-LATIN1
: U.S.A
: COMMAND
: COMMAND
: COMMAND
: COMMAND
: COMMAND
: COMMAND
: COMMAND
- 23 -
PV4