Connecting to a ResMed Power Station (RPSII)
The RPSII provides the Astral device with eight hours of power during typical use. To use, connect the
power cord of the RPSII to the DC inlet port on the device.
CAUTION
•
When using the Astral device with an RPSII, the internal battery will not be charged.
•
Do not use the RPSII and external battery together.
Connecting to an external DC power source
CAUTION
•
When using a car auxiliary adapter, start the car before plugging in the device's DC adapter.
•
If the external DC power source drops to below 11V, the Astral will switch to internal battery.
•
When the device is turned off while connected to the DC adapter, it will continue to draw
power from the external DC power source.
To connect DC power:
1. Connect the DC plug of the external DC power supply unit to the rear of the device.
2. Plug the other end of the power cord into the power outlet.
Accessories
English
45