Hart Communication; Simatic Pdm; Hart Electronic Device Description (Edd); Hart Communicator 375 Menu Structure - Siemens SITRANS LR200 7ML5422 Operating Instructions Manual

HART communication

Highway Addressable Remote Transducer, HART, is an industrial protocol that is
superimposed on the 4-20 mA signal. It is an open standard, and full details about HART can
be obtained from the HART Communication Foundation at www.hartcomm.org
(www.fieldcommgroup.org)
SITRANS LR200 can be configured over the HART network using either the HART
Communicator 375 by Fisher-Rosemount, or a software package. The recommended
software package is the SIMATIC Process Device Manager (PDM) by Siemens.
C.1

SIMATIC PDM

This software package is designed to permit easy configuration, monitoring, and
troubleshooting of HART devices. The HART EDD for SITRANS LR200 was written with
SIMATIC PDM in mind and has been extensively tested with this software.
For more information, see Operating via SIMATIC PDM (Page 54).
C.2

HART Electronic Device Description (EDD)

In order to configure a HART device, the configurator must have the HART Electronic Device
Description for the instrument in question. HART EDDs are controlled by the HART
Communication Foundation. Please check with the HART Communication Foundation for the
availability of the HART EDD for SITRANS LR200. Older versions of the library will have to
be updated in order to use all the features of SITRANS LR200.
C.3

HART Communicator 375 Menu Structure

Note
HART Communicator 375 is supported by SITRANS LR200 HART.
192
SITRANS LR200 with mA/HART
Operating Instructions, 05/2019, A5E32337676-AE
C