Damping Filter (2.2.4.); Antenna (2.2.5.); Calibration (2.3.); Low Calibration Point (2.3.1.) - Siemens SITRANS LR200 7ML5422 Operating Instructions Manual

7.2.1.4

Damping filter (2.2.4.)

Description
Values
Factory setting
7.2.1.5

Antenna (2.2.5.)

Read only. Identifies antenna configuration (Near Range [blanking] distance is automatically
adjusted to suit).
7.2.2

Calibration (2.3.)

Note
We recommend using the Quick Start wizard to configure the device.
7.2.2.1

Low calibration point (2.3.1.)

Description
Values
Factory setting
Related
parameters
①
②
③
④
The point from which level measurement is referenced. Refer to Uni-construction
1)
polypropylene rod antenna (Page 152) and Dimension drawing (Page 152).
100
The time constant for the damping filter. The damping filter smooths out the
response to a sudden change in level. This is an exponential filter and the engi-
neering unit is always in seconds. For more detail, refer to Damping (Page 178).
Range: 0 to 100.000 s
10.000 s
Distance from sensor reference point
fined in Units.
0 to 20 m
20.00 m
Units (2.2.1.) (Page 99)
Far range (2.8.2.) (Page 111)
Sensor value
Space
Distance
High calibration point
to Low Calibration Point. Units are de-
1)
⑤
Low calibration point
⑥
Far range
⑦
Level
Operating Instructions, 05/2019, A5E32337676-AE
SITRANS LR200 with mA/HART