Hart Communication - Siemens SITRANS L LU240 Compact Operating Instructions

HART communication

This device supports HART communication protocol.
SITRANS Probe LU240 can be configured over the HART network using the HART
Communicator 375/475 by Emerson, or a software package. The recommended software
package is the SIMATIC Process Device Manager (PDM) by Siemens.
Note
Supported HART parameters
For a list of applicable parameters, see the full operating instructions.
SIMATIC PDM
This software package is designed to permit easy configuration, monitoring, and
troubleshooting of HART devices. The HART EDD for SITRANS Probe LU240 was written with
SIMATIC PDM in mind and has been extensively tested with this software.
HART Electronic Device Description (EDD)
In order to configure a HART device, the configuration software requires the HART Electronic
Device Description specific to the device. Download the HART EDD for SITRANS Probe LU240
from the product page of our website:
● Product page (www.siemens.com/sitransprobelu240)
Click Support > Software Downloads. Older versions of the library will have to be updated in
order to use all the features of SITRANS Probe LU240.
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 10/2018, A5E42673704-AB
10
55