Additional Settings; Remote Commissioning; Sitrans Probe Lr Communication: Hart - Siemens SITRANS L Series Compact Operating Instructions

Commissioning

6.3 Remote commissioning

6.2.11.9

Additional settings

● Convert readings to volume (P050 to P055)
● Stored unlock value (P069)
● Set Failsafe timer conditions (P070 to P073)
● Control Analog Output (P201 to P215, and P911)
● Check installation records (P341 to P346)
● Calibrate sensor for unusual conditions (P652 to P655)
● Limit rate of change of reading (P700 to P701)
● Verify measurements (P709 to P713)
● Configure communications (P799)
● Control echo processing (P800 to P820)
● TVT curve adjustments - Auto False-Echo Suppression (P831 to P839)
● Software diagnostic tests (P900 to P901)
● Adjust measurements (P911 to P924)
For a full list of available parameters, see "Parameter assignment" in the full Operating
Instructions.
6.3 Remote commissioning
6.3.1

SITRANS Probe LR communication: HART

Note
See P001: Operation (Page 32) for an illustration of the mA output with different modes of
operation.
● You will need the full Operating Instructions to acquire the list of applicable parameters.
The full Operating Instructions are available here: Product support
(https://support.industry.siemens.com/cs/products?dtp=Manual&mfn=ps&pnid=17564&lc
=en-WW).
● The HART Electronic Device Description (EDD) may be obtained from the HART
Communication Foundation at https://fieldcommgroup.org/ (https://fieldcommgroup.org/).
● We recommend that you use SIMATIC Process Device Manager (PDM) to program your
instrument.
36
SITRANS Probe LR with mA/HART
Compact Operating Instructions, 05/2019, A5E46248119-AC