Table of Contents
Advertisement
Blinds and switch actuator RMG 8, blinds actuator JMG 4
and switch actuator module RME 8 - EIB
3 The "8x Switching / 4x Drive + Expansion" Application Program
See chapter 1.3: Differences between RMG 8 and JMG 4
3.1 Function Properties
The application program provides the functions listed below.
Function
General
Drives general
Function of the channels
Drive 1 to 4 (to 8)
Channel 1.1 / 1.2 ... 4.1 / 4.2
(... 8.1 / 8.2)
IMPORTANT: After downloading the application or after the bus voltage has been restored, it
may take up to 15 seconds until the device is ready again for operation.
3.2 Selecting in the Product Database
Manufacturer:
Product family
Product type:
Product name:
Download the application from:
As of: Apr-06 (Subject to change without notice)
Description
Basic device settings: Device type, keyboard lock, manual mode
Monitoring of the security objects, neutral position of the slats
This function is used to define which channels are to be
parameterised as drive controller and which are to be parameterised
as switching channels
Is displayed when the respective channel is parameterised as a drive
controller
Is displayed when the respective channel is parameterised as a
switching channel
THEBEN-WERK ZEITAUTOMATIK
Output
Drives and switches; modular
RMG 8 / JMG 4 (see 1.3:
http://www.theben.de
Differences between RMG 8 and JMG 4)
theben
Page 9 of 36
Advertisement
Table of Contents
