Blinds and switch actuator RMG 8, blinds actuator JMG 4
and switch actuator module RME 8 - EIB
Priority Order of the Switching Output Controller
6.2
*1
If the ETS parameter Dependence on object "Central permanent ON" is set to "yes"
*2
If the ETS parameter Dependence on object "Central permanent OFF" is set to "yes"
*3
If the ETS parameter Dependence on object "inhibit channels X.X" is set to "yes"
*4
Relay statuses are retained or already issued commands are executed or replaced with the ETS
settings for bus voltage failure
As of: Apr-06 (Subject to change without notice)
ON
OFF (Standard mode)
theben
Page 33 of 36