Blinds and switch actuator RMG 8, blinds actuator JMG 4
and switch actuator module RME 8 - EIB
1.1 Advantages
•
Modular device concept with as many as 8 driving or 16 switching channels.
•
On-site device operation, e.g. an installation test of the drive mechanisms / lighting for example is
also possible without bus voltage.
•
LED status indicators of the outputs: Switching status, keyboard lock, higher priority
•
Every driving channel can be parameterised to act as two switching channels (except for JMG 4).
•
Every switching channel can be programmed to act as a convenient timer.
•
The staircase lighting period can be extended by repeated actuation of the switch.
(when a person has to clean the staircase, etc.). Cut out early warning function in compliance with
DIN 18015-2.
•
Simple input of the execution times in the ETS.
•
Large scope of functions due to 47 objects.
•
Even with traditional drive mechanisms any desired position can be approached due to the
slippage compensation.
•
Forced object (all drives up or down with highest priority) e.g. for cleaning windows or in the case
of fire alarms.
•
Flexible reaction to security telegrams: Can be set for each drive mechanism individually for the
beginning and end of the safety status.
•
The behaviour in the case of a bus failure and in the case of a recovery of the bus/mains voltage
can be selected.
•
Feedback of the position of the drive mechanism and the switching channel status for building
visualization.
As of: Apr-06 (Subject to change without notice)
theben
Page 4 of 36