Table of Contents
Advertisement
LCD Digital Operator
2.3 Connection, wiring, and attaching
Please process the control panel as shown, and fix from the other side with M3 screw (5mm) when
you install the operator on the control panel. Recommended torque is [0.9, 1.0] Nm.
26.5
18
2-Φ4
Recommended cable
Model
Content
ICS-1
1m cable
ICS-3
3m cable
ICS-5
5m cable
Make sure to use a straight cable within 5m in length and 10BASE-T category 5 (CAT5) of UTP or
STP when the cable is prepared by the customer.
NOTE: UTP (Unshielded twist pair cable), STP (Shielded twist pair cable)
LCD Digital Operator User's Manual v0_90 110218.doc
40
80
2-M3x5 (Backside)
8
Issue 0.90 Draft
Advertisement
Table of Contents
