Name Of Parts And Contents - Omron AX-OP05-E User Manual

LCD Digital Operator

2. Name of parts and contents

7. LCD display
5. REMOTE LED
6. KEY
ENABLED LED
NO. Name of parts
1 Power Led
2 Run Led
3 Warning Led
4 Alarm Led
5 Remote Led
6 Key Enabled Led
7 LCD Display
8 Operation Key
9 Connector
10 Hole for installation
11 Case fixation screw
LCD Digital Operator User's Manual v0_90 110218.doc
2. RUN LED
3. WARNING LED
1. POWER LED
Color
Green Light on when power is supplied to the LCD digital operator.
Green Light on when the Inverter is running.
Red Light on when set value is incorrect.
Red Light on when the inverter trips.
Light on when the REMOTE key makes the compulsion
operation function effective. It doesn't light when the
Green
compulsion operation function is effective by input terminal
OPE. (Press the key more than 2 seconds)
Light on only when operation command is set in LCD digital
Green
operator.
Please refer to point 2.2 for details.
Please refer to point 3 for details.
It can be connected to the main body of the inverter via a cable
(optional)
It is the hole for installation on the control panel. Please fix from the
backside with the M3 screw.
Please unscrew these four screws and detach the case when
exchanging the battery for clock IC.
4. ALARM LED
8. OPERATION
KEY
Contents
5 Issue 0.90 Draft