LCD Digital Operator
3.6 Function Mode
1- Please select Function Mode by using the
navigation level.
2- Pressing the
key the cursor will appear in the function code.
Then use the
,
that will be changed.
3- After that, pressing the
parameter value. Use the
set.
· To store the parameter value, press the
·Pressing the
key, changes will be cancelled.
LCD Digital Operator User's Manual v0_90 110218.doc
or
,
or
key to select the function
key the cursor will appear in the
or
key to select the value to be
key.
key at the
14
Issue 0.90 Draft