R/W Storage Mode - Single Write Function - Omron AX-OP05-E User Manual

Lcd 5 line digital operator

Hide thumbs Also See for AX-OP05-E:

Table of Contents

LCD Digital Operator

4.2 R/W Storage Mode - Single WRITE function

After pressing the

key in any display mode except Read mode and Option mode, the parameter

settings stored in LCD digital operator are transferred to the inverter. If the inverter supports EzSQ

(Drive Programming), it will be transferred to the inverter automatically after the parameter copy is

finished. It will return to the previous display after write function is completed.

When the inverter does NOT support EzSQ (Drive Programming) function

Read "completed" will display

Parameter reading.

for 2 seconds

When parameter write function is completed, it

will return to previous display automatically

When the inverter supports EzSQ (Drive Programming) function

When write is completed, it will

return to previous display

automatically

Parameter writing.

EzSQ (Drive Programming) writing.

NOTE:

Refer to chapter 4.6 for details.

LCD Digital Operator User's Manual v0_90 110218.doc

Issue 0.90 Draft

Table of Contents