Read/Write Function And Operation; R/W Storage Mode - Single Read Function - Omron AX-OP05-E User Manual

Lcd 5 line digital operator

Hide thumbs Also See for AX-OP05-E:

Table of Contents

LCD Digital Operator

4. Read/Write function and operation

LCD digital operator can read and save Inverter parameter settings, and copy them to another inverter.

Specifically LCD digital operator can save four inverters' parameter sets or one inverter's

parameter set and its EzSQ (Drive Programming) program. It can be selected via the R/W

Storage Mode in the LCD configuration Option Mode.

Note: If Read operation cannot be executed, please check the Read Lock option in the LCD

configuration Option Mode.

When the R/W Storage Mode is selected to "01:Single" (this is done in the LCD configuration :

Option Mode), the function Read or Write is executed immediately after pressing

After pressing the

inverter's parameter configuration are read and saved into LCD digital operator EzSQ (Drive

Programming) program will be transferred to the LCD digital operator automatically after parameter

reading is finished. If the inverter supports EzSQ (Drive Programming) function, it returns to the

previous display after read function is completed.

When the inverter does NOT support EzSQ (Drive Programming) function

When the inverter supports EzSQ (Drive Programming) function

Parameter reading.

NOTE: All inverter parameters saved in LCD digital operator are overwritten after the

pressed.

LCD Digital Operator User's Manual v0_90 110218.doc

key in any display mode, except Write mode and Option mode, the

Parameter reading.

When parameter read function is completed, it

will return to previous display automatically

When read is completed, it will

return to previous display

automatically

Read "completed" will display

EzSQ (Drive Programming) reading.

key.

for 2 seconds

key is

Issue 0.90 Draft

Table of Contents