Table of Contents
Advertisement
LCD Digital Operator
3.2 Option Mode
1- Please press
and
enter into the OPTION MODE. The cursor will appear in the first row of
the Option Mode menu. Use
option Mode menu. To return to the navigation layer, press the
key.
2- Select the Language option and press the
appear in the Language option value. Use the
select the value to set. Press the
Press the
key to cancel the new value.
3- The cursor will appear in the second row (2. Date and Time).
4- Pressing the
key, it enters to the Date and Time layer. Use
the
or
key for moving between the Day, Month, Year,
Hour, etc... data. When the cursor is over the selected data, pressing
or
key to change the value. The change will be stored after
pressing the
key.
The settings available in this mode are:
1. Language
2. Date and Time
3. Read Lock
4. INV Type Select
5. R/W Storage Mode
6. Backlight Auto-off
7. Backlight Flicker
8. Operator Reset
9. Check Mode
Use
or
for moving between the Option Mode Menu.
LCD Digital Operator User's Manual v0_90 110218.doc
and
key at the same time to
or
key to move between the
key. The cursor will
or
key to store the new value
key to
And then
10
Issue 0.90 Draft
Advertisement
Table of Contents
