Operation Condition Of Read And Write Function - Omron AX-OP05-E User Manual

LCD Digital Operator

4.6 Operation condition of Read and Write function

Please note that the Read and Write functions are invalidated according to the inverter's state and
setting as shown in the below table.
The operation condition of reading or verifying parameter
State and setting of the inverter
Inverter is running, EzSQ (Drive
Programming) is running, written
unable
Soft locked (b031)
Display is limited (b037)
Password is being set
Trip happened
The operation condition of writing parameter
State and setting of inverter
Inverter is running, EzSQ (Drive
Programming) is running, written
unable
Soft locked (b031)
Display is limited (b037)
Password is being set
Trip happened
LCD Digital Operator User's Manual v0_90 110218.doc
Only parameter
√
√
√
√
√
Only parameter
X
X
√
√
X
23
Parameter+EzSQ (Drive
Programming)
√
√
√
X
√
Parameter+EzSQ (Drive
Programming)
X
X
√
X
X
Issue 0.90 Draft