Nortel Communication Server 1000S Installation And Configuration Manual page 269

LD 16 — Configuring an ISDN service route (Part 2 of 2)
Prompt
- INAC
LD 14 — Defining service channels and PRI trunks (Part 1 of 2)
Prompt Response
REQ NEW
CHG
TYPE TIE
TN l ch
Response
YES
Description
Add new data.
Change existing data.
When assigning several members at once use the multiple
create command NEW XX.
TIE Trunk only, allowed between MSL-1.
Loop and channel for digital trunks
ISDN Primary Rate Interface
1.5 Mb PRI implementation
Description
Insert ESN Access Code based on NARS/BARS call
type for incoming calls on TIE routes only. If NARS is
equipped, this feature inserts AC1 or AC2, depending
on the responses to AC2 in LD 15 Customer Data
Block.
For NARS/BARS call types, INAC bypasses incoming
digit insertion specified by INST in LD 16 Route Data
Block.
Unknown call types, including CDP steering codes, are
not affected by INAC, and do not bypass digit insertion
specified by INST.
INAC must be set to YES to support features such as
Network ACD and Network Message Services, which
depend on non-call associated TCAP facility messages.
Page 269 of 394
Installation and Configuration