Nt5D97 Faceplate - Nortel Communication Server 1000S Installation And Configuration Manual

ISDN Primary Rate Interface equipment overview Page 45 of 394

NT5D97 faceplate

Figure 8 on page 46 illustrates the faceplate layout for the NT5D97 DDP
card. The faceplate contains an enable/disable switch; a DDCH status LED;
6 x 2 trunk port status LEDs; and six external connectors. Table 7 on page 47
shows the name of each connector, its designation with respect to the
faceplate and the name and description of the card it is connected to. Also
shown are the names of the LEDs.
ISDN Primary Rate Interface Installation and Configuration