Setting Foot Pod Speed And Distance; Tempe; Club Sensors; Device Information - Garmin DESCENT MK2I Owner's Manual

Setting Foot Pod Speed and Distance

Before you can customize the foot pod speed and distance, you must pair your device with the foot pod sensor
(Pairing Your Wireless Sensors, page
You can set your device to calculate speed and distance using your foot pod data instead of GPS data.
1 Hold MENU.
2 Select Sensors & Accessories.
3 Select your foot pod.
4 Select Speed or Distance.
5 Select an option:
• Select Indoor when you are training with GPS turned off, usually indoors.
• Select Always to use your foot pod data regardless of the GPS setting.

tempe

™
Your device is compatible with the tempe temperature sensor. You can attach the sensor to a secure strap or
loop where it is exposed to ambient air, so it provides a consistent source of accurate temperature data. You
must pair the tempe sensor with your device to display temperature data. See the instructions for your tempe
sensor for more informationwww.garmin.com/manuals/tempe.

Club Sensors

Your device is compatible with Approach CT10 golf club sensors. You can use paired club sensors to
automatically track your golf shots, including location, distance, and club type. See the owner's manual for your
club sensors for more information (garmin.com/manuals/ApproachCT10).

Descent Mk2i Specifications

Battery type
Descent Mk2i battery life
Water rating
Decompression model
Depth sensor
Inspection interval
Operating and storage temperature
range
Underwater operating temperature
range
Charging temperature range
Wireless frequency
1
The device withstands pressure equivalent to a depth of 100 m. For more information, go to www.garmin.com/waterrating.
2
Designed to comply with CSN EN 13319.
3
Aside from normal wear and tear, performance is not affected by aging.

Device Information

125).
Device Information
Rechargeable, built-in lithium-ion battery
Up to 16 days in smartwatch mode
1
10 ATM
2
Dive (EN 13319)
Bühlmann ZHL-16C
Accurate from 0 m to 100 m (0 ft. to 328 ft.) complying with EN 13319
Resolution (m): 0.1 m until 99.9 m, 1 m at 100 m
Resolution (ft.): 1 ft.
Inspect parts before each use for damage. Replace parts as needed.
From -20º to 50ºC (from -4º to 122ºF)
From 0º to 40ºC (from 32º to 104ºF)
From 0º to 45ºC (from 32º to 113ºF)
2.4 GHz @ 11.5 dBm nominal
3
127