Pairing The Transmitter With A Descent Mk2I Dive Computer; Selecting Paired Transmitters To View On Your Dive Data Screens - Garmin DESCENT MK2I Owner's Manual

Pairing the Transmitter with a Descent Mk2i Dive Computer

To pair the transmitter, you must have a pressurized tank and regulator.
The Descent T1 can transmit air pressure data to a Descent Mk2i dive computer.
Before you use the transmitter for the first time, you must pair it with the dive computer. Out of the box, the
transmitter is in low power mode. You must wake the device from low power mode to complete the pairing
process.
NOTE: If a transmitter was packaged with your dive computer, they are already paired.
1 Install the transmitter on the first-stage regulator
page 13).
2 Gradually open the tank valve to pressurize the first-stage regulator.
When the transmitter detects pressure, it wakes from low power mode. The transmitter plays a tone when it
wakes from low power mode and is ready to pair.
3 On the Descent Mk2i dive computer, hold MENU, and select Dive Setup > Air Integration > Transmitters >
Add New.
The dive computer starts searching and displays a list of nearby transmitters.
4 From the list of transmitters, select the transmitter ID you want to pair.
The transmitter ID is printed on the housing.
When the pairing process is complete, Connected appears on the dive computer screen. The transmitter begins
sending tank pressure data, and it is ready to use on a dive. The next time the transmitter and dive computer
are turned on and within wireless range, they connect automatically when you start a dive.
If you are diving with a group, you can pair up to 5 Descent T1 transmitters with the dive computer.

Selecting Paired Transmitters to View on Your Dive Data Screens

You can view two paired transmitters at-a-glance on the primary dive data screen. You can customize which
paired transmitters appear on the screen. By default, the first and second transmitters that you pair appear.
1 Hold MENU.
2 Select Dive Setup > Air Integration > Display Setup.
3 Select a field to customize.
4 Select a paired transmitter.
16
(Installing the Transmitter on Your Tank Regulator,
Diving