Viewing The Surface Interval Widget; Viewing The Dive Log Widget; Dive Planning - Garmin DESCENT MK2I Owner's Manual

Viewing the Surface Interval Widget

The widget displays your surface interval time, tissue load, and central nervous system (CNS) oxygen toxicity
percentage.
1 From the watch face, press UP or DOWN to view the surface interval widget.
2 Press START to view your oxygen toxicity units (OTU) and CNS percentage.
NOTE: The OTU accumulated during a dive expire after 24 hours.
3 Press DOWN to view your tissue load details.

Viewing the Dive Log Widget

The widget displays summaries of your recently recorded dives.
1 From the watch face, press UP or DOWN to view the dive log widget.
2 Press START to view your most recent dive.
3 Press DOWN > START to view a different dive (optional).
4 Press START, and select an option:
• To view additional information about the activity, select All Stats.
• To view additional information about one of multiple apnea dives in the activity, select Dives, and select a
dive.
• To view the activity on a map, select Map.
NOTE: The device shows your entry and exit locations if you waited for GPS signals before and after the
dive.
• To save a dive entry or exit location, select Save Location.
• To view the depth profile of the activity, select Depth Profile.
• To view the temperature profile of the activity, select Temperature Plot.
• To view the gases you used, select Gas Switches.

Dive Planning

You can plan for future dives using your device. The device can calculate no-decompression limit (NDL) times
or create decompression plans. When planning a dive, the device uses your residual tissue load from recent
dives in the calculations.
28 Diving