Light Sources - BMW S 1000XR 2018 Rider's Manual

Fasten brake line in holder 2
and install screw 1.
Adjust chain tension (

Light sources

Replacing light sources
for low-beam and high-
beam headlight
NOTICE
The alignment of the connector
may vary from the illustration de-
pending on the light source to be
replaced.
Park motorcycle, ensuring that
support surface is firm and
level.
Turn off ignition.
161).
Remove cover 1 to replace
light source for low-beam
headlight.
Remove cover 2 to replace
light source for high-beam
headlight.
Disconnect plug 3.
9
145
z