Set Temp. Correction - Toshiba RAS-B10J2FVG-E Service Manual

Item Operation flow and applicable data,etc
Set temp. can be corrected by changing the set temp.
29. Set temp.
correction
correnction value.
Initial setting of the set temp. correction value is 0.
Set temp. = Set temp. (TS)+ Set temp. correction
Set temp. (TS) : remote control or indoor unit display setting
Cooling
(Dry mode)
Heating
< How to change the set temp. correction >
1. Operate the air conditioner and select cooling or heating
mode.
(The set temp. correction can't be changed at standby
mode.)
2. Push and hold AIR OUTLET SELECT button on the unit
operation panel
3. Push OPERATION button on the unit operation panel
10 times.
Set temp. correction value is displayed on the
TEMPERATURE indicator.
TEMPERATURE
4. Push TEMPERATURE button (UP or DOWN) to change

set temp. correction.

5. Release AIR OUTLET SELECT button.
Set temp. correction is memorized and set temp. value is
displayed on the TEMPERATURE indicator again.
Set temp. correction
−5 ∼ +5°C
−5 ∼ +5°C
AIR OUTLET SELECT button
OPERATION button
TEMPERATURE button
- 54 -
Description
1. Purpose
When the difference between the set
temperature of the remote control and
the room temperature is wide due to
the installation condition, etc, the set
temperature can be corrected.
2. Description
For example, when set temp. is 25°C
but room temp. is stable 27°C at cooling
mode, chage set temp. correction
(Cooling) from 0 to −2°C
• Continue to push and hold AIR
OUTLET SELECT button.
• Continue to push and hold AIROUTLET
SELECT button.