Set Temperature Correction - Toshiba RAS-M13PKVP-E Service Manual

Item
18. Set temperature Indoor Control P.C. Board (Factory Default)
correction
Operation fl ow and applicable data, etc.
L01
DB01
C03
T101
In HEAT Operation
Jumper wire setup
J804 J805
× ×
×
×
: With Jumper wire
: Cut Jumper wire
1. Purpose
When the difference between the set
temp. of the remote controller and
the room temp. is wide due to the
Jumper wire
J804
installation condition, etc, the set temp.
J805
is corrected.
J806
(HEAT operation only)
J807
2. Description
IC801
The set temp. received from the remote
controller is corrected.
The correct value from –2°C to +4°C
J804
J805
is changed by the jumper wire on P.C.
J806
board of the indoor microcomputer.
J807
HEAT
shift value
–2
+4
+2
0 At shipment
– 46 –
Description