Cleaning, Sanitation And Maintenance - Scotsman C0322 Installation Manual

Cleaning, Sanitation and Maintenance

This ice system requires three types of
maintenance:
•
Remove the build up of mineral scale from
the ice machine's water system and sensors.
•
Sanitize the ice machine's water system and
the ice storage bin or dispenser.
•
Clean or replace the air filter and clean the
air cooled condenser (air cooled models
only).
It is the User's responsibility to keep the ice
machine and ice storage bin in a sanitary condition.
Sanitize the ice storage bin as frequently as local
health codes require, and every time the ice
machine is cleaned and sanitized.
The ice machine's water system should be
cleaned and sanitized a minimum of twice per
year. This is critical to the proper operation of
the ice machine. Contact you local authorized
service agent for water system cleaning.
.Air cooled condenser filter
1. Pull air filter(s) forward from side panel.
2. Wash the dust and grease off the filter.
3. Return it to its original position.
Do not operate the machine without the filter in
place except during cleaning.
Air cooled condenser
If the machine has been operated without a filter
the air cooled condenser fins will need to be
cleaned.
They are located under the fan blades. The
services of a refrigeration technician will be
required to clean the condenser.
Exterior Panels
The front and side panels are durable stainless
steel. Fingerprints, dust and grease will require
cleaning with a good quality stainless steel cleaner.
Air and Water Cooled Installation Manual
Water filters
If the machine has been connected to water filters,
check the cartridges for the date they were
replaced or for the pressure on the gauge. Change
cartridges if they've been installed more than 6
months or if the pressure drops too much when the
ice machine fills with water.
July 2007
Page 15
C0322 through C1030
Air Filter