Options - Scotsman C0322 Installation Manual

C0322 through C1030
Air and Water Cooled Installation Manual

Options

Advanced Feature Board, kit #KSB
When this option is present there is an additional
display panel in the area below the main control
board. It is not visible when the front panel is on.
The Smart-Board's features include:
•
Seven day programmable ice level setting
when used with the optional Ultrasonic ice
level control
•
Recording of machine operation, including
cycle time.
•
Calculation of average cycle time
•
Recall of malfunctions with the time they
occurred.
™
SmartBoard Advanced Feature Control
See Instructions for Available Features
Ice
The cuber drops ice in large sections. That ice will
break up into random parts as it falls into the bin,
but some large sections may remain on top of the
ice in the bin. When removing ice, tap the groups of
ice with an ice scoop to separate them into smaller
units. In a dispenser, this ice will break up into
mostly individual cubes as the dispense
mechanism moves the ice.
The ice in the bin will slope down from the right to
the left. This is normal.
Heat
Air cooled models will generate heat when in
operation. That heat is discharged out the back of
34
SEL ESC
the cabinet.
ENTER
Noise
02-4293-01 Rev A.
The ice machine will make noise when it is in ice
making mode. The compressor, fan motor(s) if air
cooled and water pump all produce some sound. It
is also normal to hear some cracking just before
the harvest cycle begins. In addition, during the
harvest cycle the harvest assist solenoid will click
twice as it pushes the ice out and returns to its
normal position. The ice harvests as a unit or slab,
which makes some noise when it impacts the bin or
dispenser. These noises are all normal for this
machine.
July 2007
Page 14