Tcp/Ip Panel - Extron electronics DVS 605 Series User Manual

To edit communication settings from the Device Discovery panel:
In the Device Discovery panel, click the Edit button of the desired device. The
1.
Communication Settings dialog box opens.
1
Figure 32.
2. Enter the relevant details for each field or select the DHCP checkbox (see figure 32,
See Ethernet Settings
3.
Finalize the settings in one of the following ways:
• Click the Apply button (
Discovery panel.
Click the Apply and Connect button (
•
the selected device. A new device configuration tab opens.
• Click the Cancel button (
Device Discovery panel.

TCP/IP Panel

The TCP/IP panel contains a means of connecting to a specific (IP address known) device
through Ethernet.
1
2
3
Figure 33.
1.
Click the TCP/IP tab.
2. In the IP Address field (see figure 33,
3. Enter the device password in the Password field (
NOTES:
•
•
•
0.0.0.0
2 3 4
Communications Settings Dialog Box
on page 118 for configuration details).
) to accept the changes and return to the Device
2
) to cancel any pending changes and return to the
4
192.168.254.254
TCP/IP Panel
The factory configured passwords for all accounts on this device have been set
to the device serial number.
If the device is reset back to default settings, there will be no password. New
passwords need to be configured to secure the device (see
on page 121).
Check the Show Characters checkbox to have the password characters
visible when entering them.
) to accept the changes and connect to
3
4
), enter the IP address of the desired device.
1
).
2
DVS 605 • Product Configuration Software
.
1
Password Page
63