Extron electronics Digital Video Scaler Series User Manual
  1. Manuals
  2. Brands
  3. Extron electronics Manuals
  4. Media Converter
  5. Digital Video Scaler Series
  6. User manual
Extron electronics Digital Video Scaler Series User Manual

Extron electronics Digital Video Scaler Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
im Vertrieb von
www.camboard.de
CAMBOARD Electronics
DVS 304, DVS 304 D, DVS 304 A , DVS 304 AD
Tel. 07131 911201
Fax 07131 911203
DVS 304
Digital Video Scaler Series
ce-info@camboard.de
68-1039-01
Rev. A
08 05

Advertisement

Table of Contents
loading

Related Manuals for Extron electronics Digital Video Scaler Series

Summary of Contents for Extron electronics Digital Video Scaler Series

  • Page 1 Vertrieb von CAMBOARD Electronics DVS 304 Digital Video Scaler Series DVS 304, DVS 304 D, DVS 304 A , DVS 304 AD 68-1039-01 Rev. A 08 05 www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...
  • Page 2 im Vertrieb von CAMBOARD Electronics Precautions Safety Instructions • English Warning This symbol is intended to alert the user of important operating and maintenance Power sources • This equipment should be operated only from the power source indicated on the product.
  • Page 3 im Vertrieb von CAMBOARD Electronics Quick Start — DVS 304 Installation Output 15-pin HD connector RGB/R-Y,Y,B-Y You can connect both outputs simultaneously Step 1 to two different displays. The sync format is Refer to the application example at the end of this the same for both outputs.
  • Page 4 im Vertrieb von CAMBOARD Electronics Quick Start — DVS 304, cont’d DVD Player LCD Projector DVS 304 RS-232 100-240V RGB/R-Y,Y,B-Y/YC/VID /VID /R-Y /B-Y RESET RS-232 Control 50/60 Hz RGB/R-Y,Y,B-Y LINK Plasma Display Document Camera Laptop Computer DVS 304 Application example Sound System DVD Player LCD Projector...
  • Page 5 im Vertrieb von CAMBOARD Electronics DVS 304 Menu System Default cycle menu Default Cycle 2 sec. 2 sec. INPUT 1 EXTRON 60-736-01 OUTPUT Power COMPOSITE DVS 304 FW version 1.00 1024 x 768@60 2 sec. 2 sec. 2 sec. Main menu Default Cycle 2 sec.
  • Page 6 im Vertrieb von CAMBOARD Electronics Quick Start — DVS 304, cont’d Start Auto Image menu Default Cycle 2 sec. Power INPUT 1 OUTPUT START AUTO 2 sec. MENU NEXT COMPOSITE 1024 x 768@60 IMAGE ON IN1 PRESS NEXT NEXT TO START Input Configuration menu START AUTO IMAGE ON IN1...
  • Page 7 im Vertrieb von CAMBOARD Electronics Output onfiguration menu PICTURE CONTROL MENU OUTPUT RESOLUTION H SYNC V FORMAT NEXT NEXT NEXT NEXT CONFIG 1024x768@60 RGBHV Sync polarity combinations Resolution refresh rate Output type • H Neg V Neg (default) • See the scaler output table below for •...
  • Page 8 im Vertrieb von CAMBOARD Electronics Quick Start — DVS 304, cont’d Advanced Configuration menu CONFIG MENU ADVANCED AUTO IMAGE BLUE MODE AUTO SWITCH RGB DELAY NEXT NEXT NEXT NEXT NEXT CONFIG <OFF> <OFF> <OFF> 0.0 sec. Auto imaging Auto switching RGB delay Blue mode When auto image is on,...
  • Page 9 im Vertrieb von CAMBOARD Electronics Executive Mode menu Enable Executive Mode Default Cycle 2 sec. INPUT 1 OUTPUT COMPOSITE 1024 x 768@60 2 sec. Press for 2 seconds* Menu Next EXE MODE ENABLED 10 sec. timeout Disable Executive Mode Default Cycle 2 sec.

  • Page 10: Table Of Contents

    im Vertrieb von CAMBOARD Electronics Table of Contents Chapter 1 • Introduction ...................... 1-1 About this Manual ......................1-2 About the DVS 304, DVS 304 D, DVS 304 A, DVS 304 AD ......1-2 Controlling the DVS 304 video and RGB scaler ............. 1-2 Features ...........................
  • Page 11 im Vertrieb von CAMBOARD Electronics Table of Contents, cont’d Advanced configuration ....................2-17 Auto image ........................2-17 Blue mode .......................... 2-17 Autoswitch mode ......................2-18 RGB delay ........................... 2-18 OSD label ........................... 2-18 Test pattern ........................2-18 Picture-in-picture mode ....................2-19 Changing the input ......................
  • Page 12 im Vertrieb von CAMBOARD Electronics Scaler Settings page ......................4-5 Passwords ..........................4-5 Firmware upgrade ......................4-6 File Management ......................4-7 Control ..........................4-8 User Control page ....................... 4-8 Presets page ........................4-9 PIP Setup page ........................4-11 Appendix A • Appendix ......................

  • Page 13: Chapter 1 • Introduction

    im Vertrieb von CAMBOARD Electronics DVS 304 Chapter One Introduction About this Manual About the DVS 304, DVS 304 D, DVS 304 A, DVS 304 AD Features www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...

  • Page 14: About This Manual

    im Vertrieb von CAMBOARD Electronics Introduction About this Manual This manual discusses how to install, configure, and operate the Extron DVS 304 video and RGB scaler and how to operate the optional IR 902 infrared remote control (part #70-495-01). Throughout this manual the terms “DVS”, “digital video scaler”, and “scaler” are used interchangeably to refer to the same product.
  • Page 15 im Vertrieb von CAMBOARD Electronics Input 3 — A 4-pin mini-DIN connector accepts an S-video signal. Input 4 — A 15-pin HD connector accepts an RGB, component video, S-video or composite video signal. RGB and video scaling — Provides a high performance scaling engine with the capacity to scale standard definition video, high definition video, and computer-video signals up and/or down in resolution.

  • Page 16: Options And Accessories

    im Vertrieb von CAMBOARD Electronics Introduction, cont’d The 1U high and full rack DVS 304 A and DVS 304 AD (audio models) can be rack mounted using included rack/through-desk mounting brackets. Options and accessories The DVS 304’s optional equipment includes: •...

  • Page 17: Chapter 2 • Installation And Operation

    im Vertrieb von CAMBOARD Electronics DVS 304 Chapter Two Installation and Operation Mounting the Scaler Rear Panel Features Front Panel Features Menus, Configuration, and Adjustments Resetting an Input Resetting the Unit System Reset Front Panel Lockout (Executive Mode) IR 902 Infrared Remote Control www.camboard.de Tel.

  • Page 18: Mounting The Scaler

    im Vertrieb von CAMBOARD Electronics Installation and Operation Mounting the Scaler The DVS 304 is 1U high, and a half rack wide. It is rack mountable, or it can be placed on a table or other furniture. Rubber feet and rack mounting hardware are included.

  • Page 19: Rack Mounting The Dvs 304 A

    im Vertrieb von CAMBOARD Electronics Attach the rack shelf to the rack using four 10-32 x ¾” bolts (provided). Insert the bolts through #10 beveled washers, then through the holes in the rack ears and rack (figure 2-1). Rack mounting the DVS 304 A To mount the DVS 304 A in a rack, do the following: If feet were installed on the bottom of the DVS 304, remove them.

  • Page 20: Application Diagram

    im Vertrieb von CAMBOARD Electronics Installation and Operation Application diagram The diagram shown below is an example of a typical DVS 304 AD application with cable connections. Digital Tape Deck w/ SDI Output RS-232 Control TCP/IP Sound System Network -2 32 LI NK /V ID /Y C...
  • Page 21 im Vertrieb von CAMBOARD Electronics RS-232 100-240V RGB/R-Y,Y,B-Y/YC/VID /VID /R-Y /B-Y RESET 50/60 Hz RGB/R-Y,Y,B-Y LINK Figure 2-6 — DVS 304 D rear panel power connector AC power connector — Plug a standard IEC power cord into this connector to connect the scaler to a 100 to 240VAC, 50 Hz or 60 Hz power source. The front panel control and input selection buttons will light in sequence during power-up.
  • Page 22 im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Video input 4: RGB/R-Y, Y, B-Y/YC/VID — Connect RGBHV, RGBS, RGsB, RGBcvS, YUVi, YUVp, S-video and composite video through this 15-pin HD connector. See pin configurations below. Signal Input 4 Pin Configuraton RGB/R-Y,Y,B-Y/YC/VID Pin 1 Pin 2 Pin 3 Pin 13 Pin 14 RGBHV...
  • Page 23 im Vertrieb von CAMBOARD Electronics LAN connector — Plug an RJ-45 jack into this socket to connect the unit to a computer network. Use a patch cable to connect to a switch, hub, or router. See the following page for wiring information. Patch (straight) cable Side 1 Side 2...

  • Page 24: Front Panel Features

    im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Front Panel Features The front panel buttons, controls, LCD, and infrared sensor of the DVS 304, as shown on the following pages, are found on all models of the DVS 304 scaler series.

  • Page 25: Menus, Configuration, And Adjustments

    im Vertrieb von CAMBOARD Electronics Menus, Configuration, and Adjustments Scaler configuration and adjustments can be performed by using the embedded Web pages and the Windows-based control program (see chapter 3, Serial Communication for details) or by using the front panel controls and the menus that are displayed on the DVS 304’s LCD screen.

  • Page 26: Start Auto Image

    im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Default Cycle 2 sec. 2 sec. INPUT 1 60-736-01 EXTRON OUTPUT Power FW version 1.00 COMPOSITE DVS 304 2 sec. 2 sec. 1024 x 768@60 2 sec. MENU START AUTO IMAGE ON IN1 MENU INPUT CONFIG...

  • Page 27: Input Configuration

    im Vertrieb von CAMBOARD Electronics If an unknown input is connected to the DVS 304, the processor measures and estimates the resolution of the incoming video. To turn on this feature, select the Advanced Config menu and choose “On”. Start auto imaging on a selected input by pressing “Next” after the Start Auto Image menu.

  • Page 28: Input 2 Video Type

    im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Input 2 video type Rotate either the Adjust horizontal ( ) knob or Adjust vertical ( ) knob while in the Input 2 submenu to select the appropriate video format (composite, S-video, YUV, YUVp) for input 2.

  • Page 29: Output Configuration

    im Vertrieb von CAMBOARD Electronics Output configuration The output configuration menu allows you to select the scaler output rate from different resolutions, refresh rates, sync types (RGBHV, RGBS, RGsB and Y, B-Y, R-Y), and sync polarity. PICTURE CONTROL MENU OUTPUT H SYNC V RESOLUTION FORMAT...

  • Page 30: Output Signal

    im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Available Scaler Output Resolutions and Rates Resolution 50 Hz 60 Hz 72Hz 96Hz 100Hz 120 Hz 640 x 480 800 x 600 852 x 480 1024 x 768 1024 x 852_ 1024 x 1024 1280 x 768_...

  • Page 31: Audio Configuration (Dvs 304 A And Dvs 304 Ad Only)

    im Vertrieb von CAMBOARD Electronics Audio configuration (DVS 304 A and DVS 304 AD only) Audio Configuration allows the input level to be adjusted between –15dB to +9dB for each audio input. OUTPUT CONFIG MENU IN1 LEVEL AUDIO NEXT NEXT CONFIG (audio models only) Input level...

  • Page 32: Clear (Clr) Memory Preset

    im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Using either the Adjust horizontal ( ) or Adjust vertical ( ) knob, select (< >) either N/A, 1, 2, or 3 to select a preset. The default is <N/A>. To save the preset, press the Next button.

  • Page 33: Advanced Configuration

    im Vertrieb von CAMBOARD Electronics To change an IP address, do the following: Press and hold the Input 4 and Next buttons simultaneously for 2 seconds. This introduces the Setup mode. Change the flashing octet selection by using the Adjust vertical ( ) knob. Change the selection numbers by using Adjust horizontal ( ) knob.

  • Page 34: Autoswitch Mode

    im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Use either the Adjust horizontal ( ) or Adjust vertical ( ) knob to select this mode. The default state is “Off”. The Blue mode is not effective for RGB pass-through. Autoswitch mode The Autoswitch mode causes the highest numbered input, which has a signal present, to be automatically selected.

  • Page 35: Picture-In-Picture Mode

    im Vertrieb von CAMBOARD Electronics Picture-in-picture mode The DVS 304 allows you to display two image sources on the screen simultaneously. Keep in mind that when using the PIP feature, one image source must be low-resolution (composite, S-video, YUVi and RGBcvS) video, while the other must be high resolution (YUVp, RGB scaled) video.

  • Page 36: Exit Menu

    im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Exit menu From this submenu, press the Menu button to return to the Start Auto Image menu cycle, or press the Next button to return to the default sequence. Default Cycle 2 sec.

  • Page 37: System Reset

    im Vertrieb von CAMBOARD Electronics Reset Mode Comparison/Summary Mode Activation Result Purpose/Notes Hold down the Mode 1 causes the DVS 304 to revert to Use mode 1 to recessed Reset button the factory default firmware. Event remove a version of while applying power scripting does not start if the unit is firmware if...

  • Page 38: Front Panel Lockout (Executive Mode)

    im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d Front Panel Lockout (Executive mode) To prevent accidental changes to settings, press the Menu and Next buttons simultaneously for 2 seconds to enable the DVS 304’s front panel lockout mode, also known as executive mode. Executive mode locks all front panel functions except input switching and preset recall.

  • Page 39: Ir 902 Infrared Remote Control

    im Vertrieb von CAMBOARD Electronics IR 902 Infrared Remote Control MEMORY PRESETS The IR 902, shown at right, replicates most of the front panel controls except the Menu and Next buttons. See chapter 3, Serial VOLUME ON/OFF Communication, for details. The topmost part of the IR 902 features SWAP memory preset buttons, input switching,...
  • Page 40 im Vertrieb von CAMBOARD Electronics Installation and Operation, cont’d www.camboard.de Tel. 07131 911201 ce-info@camboard.de 2- 24 DVS 304 • Installation and Operation Fax 07131 911203...

  • Page 41: Chapter 3 • Serial Communication

    im Vertrieb von CAMBOARD Electronics DVS 304 Chapter Three Serial Communication RS-232 Programmer’s Guide Control Software for Windows www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...

  • Page 42: Sis Programmer's Guide

    DVS 304 scaler responds by sending a message to the host. No response is required from the host. The scaler-initiated messages are listed here (underlined). (C) Copyright 2005, Extron Electronics, DVS 304 series, Vx.xx The DVS 304 sends the copyright message when it first powers on. Vx.xx is the firmware version number.

  • Page 43: Copyright Information

    • ASCII to hexadecimal character conversion table Copyright information © Copyright 2005, Extron Electronics, DVS 304 series, Vx.xx Thur, 18 Feb 2005 11:27:33 The copyright message is displayed upon connecting to IP Link product via TCP/IP or Telnet. Vx.xx is the firmware version number. The current date and time are displayed.

  • Page 44: Error Responses

    im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d If the correct password is entered, the unit responds with Login Administrator Login User , depending on password entered. If passwords are the same for both administrator and user, the unit defaults to administrator privileges.

  • Page 45: Symbol Definitions

    im Vertrieb von CAMBOARD Electronics Symbol definitions = Hardware (MAC) address (xx-xx-xx-xx-xxxx) • = Space = Subnet mask (xxx.xxx.xxx.xxx). Leading = Carriage return with line feed zeros are optional in setting values in each = Carriage return with no line feed of four fields, and are suppressed in = Escape returned values.
  • Page 46 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d = Event data size 1 – 11 = entry without password goes to b = bit the level specified (if an admin B = byte (8 bits) password exists). The response as returned as 2-digits with a leading S = short (16 bits) zero.
  • Page 47 im Vertrieb von CAMBOARD Electronics = Text label / Preset name: = Audio level adjustment X101 Up to 16 characters range: -9 to +15 dB = Picture adjustment: 0 to 127 = Audio gain adjustment X102 range: 0 to 15 dB = H and V position* = Audio attenuation = H and V size*...

  • Page 48: Command/Response Table For Sis Commands

    im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d Command/response table for SIS commands Command ASCII Command Response Additional description (host to scaler) (scaler to host) Input Selection Video and Audio • All Select video and audio from input source Video &...
  • Page 49 im Vertrieb von CAMBOARD Electronics Command/response table for SIS commands (continued) Command ASCII Command Response Additional description (host to scaler) (scaler to host) Active Lines Specify a value Adjust the active lines to specified value. Increment value +13 # Increase the active lines. Decrement value -13 # Decrease the active lines.
  • Page 50 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d Command/response table for SIS commands (continued) Command ASCII Command Response Additional description (host to scaler) (scaler to host) Detail Filter Set detail level Specify the detail level to Increment up Increase the detail level. Increment down –...
  • Page 51 im Vertrieb von CAMBOARD Electronics Command/response table for SIS commands (continued) Command ASCII Command Response Additional description (host to scaler) (scaler to host) Output Scaler Rate Set output rate Select output resolution and refresh rate View output rate Show selected output rate. Add a leading 0 when it is a single digit selection.
  • Page 52 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d Command/response table for SIS commands (continued) Command ASCII Command Response Additional description (host to scaler) (scaler to host) Volume control (audio models only) Specific volume Set volume to X104 X104 X104 Increment Increase volume.
  • Page 53 im Vertrieb von CAMBOARD Electronics Command/response table for SIS commands (continued) Command ASCII Command Response Additional description (host to scaler) (scaler to host) Text label (OSD) (Input 4 only) Write Name Nam 4 Writes text for input 4. Read Name Esc NI View text label for input 4.
  • Page 54 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-14 DVS 304 • Serial Communication Fax 07131 911203...
  • Page 55 im Vertrieb von CAMBOARD Electronics www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-15 DVS 304 • Serial Communication Fax 07131 911203...
  • Page 56 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-16 DVS 304 • Serial Communication Fax 07131 911203...
  • Page 57 im Vertrieb von CAMBOARD Electronics www.camboard.de Tel. 07131 911201 ce-info@camboard.de DVS 304 • Serial Communication 3-17 Fax 07131 911203...
  • Page 58 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-18 DVS 304 • Serial Communication Fax 07131 911203...
  • Page 59 im Vertrieb von CAMBOARD Electronics www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-19 DVS 304 • Serial Communication Fax 07131 911203...
  • Page 60 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-20 DVS 304 • Serial Communication Fax 07131 911203...
  • Page 61 im Vertrieb von CAMBOARD Electronics www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-21 DVS 304 • Serial Communication Fax 07131 911203...
  • Page 62 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-22 DVS 304 • Serial Communication Fax 07131 911203...

  • Page 63: Control Software For Windows

    To run the control program, double-click on the DVS 304 Control Pgm icon in the Extron Electronics group or folder. The Comm menu appears on the screen.
  • Page 64 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d Click on the I/O Config button to configure the inputs from the I/O Configuration Window. Click the Input Config (advanced) button for advanced input parameters, as shown below. www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-24 DVS 304 •...

  • Page 65: Using The Help Program

    For information on program features, press the F1 computer key, or click on the Help menu from within the DVS 304 Control Program, or double-click on the DVS 304 Help icon in the Extron Electronics group or folder. For explanations of buttons or functions, click on the tabs in the help screen to reach the desired screen.
  • Page 66 im Vertrieb von CAMBOARD Electronics Serial Communication, cont’d www.camboard.de Tel. 07131 911201 ce-info@camboard.de 3-26 DVS 304 • Serial Communication Fax 07131 911203...

  • Page 67: Chapter 4 • Ethernet Control

    im Vertrieb von CAMBOARD Electronics DVS 304 Chapter Four Ethernet Control Accessing and Using the Web Server Navigating the Default Web Pages www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...

  • Page 68: Accessing And Using The Web Server

    im Vertrieb von CAMBOARD Electronics The DVS 304 features an on-board Web server, displayed as a set of default Web pages. These pages allow you to control and operate the DVS 304 unit through its Ethernet port, connected via a LAN or WAN, using a Web browser such as Microsoft’s Internet Explorer (version 5.5 or higher), or Netscape Navigator (version 6.0 or higher).

  • Page 69: Navigating The Default Web Pages

    im Vertrieb von CAMBOARD Electronics Ethernet Control Click in the Password field and type in the appropriate administrator or user password. Click the OK button. The scaler checks several possibilities, in the following order, and then responds accordingly: Does the address include a specific file name, such as 10.13.156.10/file_name.html? If so, the DVS 304 downloads that HTML page.

  • Page 70: Configuration

    im Vertrieb von CAMBOARD Electronics Configuration The Configuration tab includes pages that show the current system settings, scaler settings, passwords and firmware upgrade data for the DVS 304 series. System Settings page The Systems Settings page (figure 4-4) consists of fields where you can view and edit IP administration and system settings.

  • Page 71: Scaler Settings Page

    im Vertrieb von CAMBOARD Electronics Ethernet Control, cont’d The default address is 192.168.254.254, but if this conflicts with other equipment at your installation, you can change the IP address to any valid value. Editing the Extron IP address while connected via the Ethernet port can immediately disconnect the user from the scaler.

  • Page 72: Firmware Upgrade

    im Vertrieb von CAMBOARD Electronics twice; once in the Password field and then again in the Re-enter Password field. Characters in these fields are masked by asterisks (*****). The following characters are invalid in passwords: {space} + ~ @ = ‘ [ ] { } <...

  • Page 73: File Management

    im Vertrieb von CAMBOARD Electronics Ethernet Control, cont’d Figure 4-6 — Firmware Upgrade page The Firmware Upgrade page is only for replacing the firmware that controls all scaler operation. To insert your own HTML pages, see “File Management” later in this chapter. Insure that your PC is connected to the DVS 304 scaler via the scaler’s Ethernet port.

  • Page 74: Control

    im Vertrieb von CAMBOARD Electronics Figure 4-7 — Web server File Management screen Click the Browse button to locate the file(s) you want to upload. If you want one of the pages that you create and upload to be the default start-up page, name that file “index.html”.

  • Page 75: Presets Page

    im Vertrieb von CAMBOARD Electronics Ethernet Control, cont’d Figure 4-8 — User Control page The aspects of each input (1-4) can be controlled independently. Click on the appropriate input number to immediately change its onscreen attributes. Video/Audio breakaway (DVS 304 A or DVS 304 AD only) Use the check boxes shown below to select whether video, audio or both are switched to the new selected input.
  • Page 76 im Vertrieb von CAMBOARD Electronics Memory presets To create a memory preset, do the following: Click the User Control link on the left side of the page. The User Control page appears (figure 4-8). Click the button for the input (inputs 1, 2, or 3) you would like to preset. Make changes to the attributes (e.g., aspect ratio, zoom, brightness, etc.) of your chosen input and press Enter.

  • Page 77: Pip Setup Page

    im Vertrieb von CAMBOARD Electronics Ethernet Control, cont’d PIP Setup page The PIP Setup page (located under the Control tab, figure 4-10), allows easy, remote access to the picture in picture option of the DVS 304 series. Figure 4-10 — PIP Setup page To use this feature, do the following: Click the User Control link on the left side of the page.
  • Page 78 im Vertrieb von CAMBOARD Electronics Use the Swap button to exchange the size and position of the main and PIP windows. Audio (DVS 304 A only) Use the Audio Follows radio button, shown below, to assign audio to either the main image or the PIP image.

  • Page 79: Specifications

    im Vertrieb von CAMBOARD Electronics DVS 304 Appendix Appendix Specifications Part Numbers and Accessories Serial Digital Interface (SDI) Card Installation www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...
  • Page 80 im Vertrieb von CAMBOARD Electronics Appendix Video input Number/signal type ....1 (RGBHV, RGBS, RGsB) pass-through, RGBHV, RGBS, RGsB, RGBcvS, component video, S-video, composite video 1 composite video, S-video, component video (Y, R-Y, B-Y) 1 S-video, 1 SDI (optional, DVS 304D only) 1 composite video Connectors ........
  • Page 81 im Vertrieb von CAMBOARD Electronics Audio — DVS 304 A, DVS 304 AD Gain ..........Unbalanced output: 0 dB; balanced output: +6 dB Frequency response ....20 Hz to 20 kHz, ±0.05 dB THD + Noise ......... 0.03% @ 1 kHz at nominal level, 0 dB gain S/N ..........
  • Page 82 im Vertrieb von CAMBOARD Electronics Appendix, cont’d General Power ..........100VAC to 240VAC, 50/60 Hz, 30 watts, internal, autoswitchable Temperature/humidity ....Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Rack mount DVS 304, DVS 304D ..

  • Page 83: Included Parts

    im Vertrieb von CAMBOARD Electronics Part Numbers and Accessories Included parts These items are included in each order for a DVS 304 scaler: Included parts Part number DVS 304 or DVS 304 D 60-736-01/03 Rubber feet (self-adhesive) (4) IEC power cord 27-044-01 Tweeker (small screwdriver) User’s Manual...
  • Page 84 im Vertrieb von CAMBOARD Electronics Appendix, cont’d Serial Digital Interface (SDI) Card Installation The optional SDI card may be installed in the scaler if it does not already have an input for a serial digital interface signal. We recommend that you send the unit in to Extron for service and updates.
  • Page 85 im Vertrieb von CAMBOARD Electronics Do not touch any switches or other electronic components inside the scaler. Doing so could damage the scaler. Electrostatic discharge (ESD) can damage IC chips even though you cannot feel it. You must be electrically grounded before proceeding with any electronic component replacement.
  • Page 86 im Vertrieb von CAMBOARD Electronics Appendix, cont’d www.camboard.de Tel. 07131 911201 ce-info@camboard.de DVS 304 • Appendix Fax 07131 911203...
  • Page 87 Extron’s Warranty Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. In the event of malfunction during the warranty period...
  • Page 88 PM Industrial Building 16 Ichibancho The Netherlands Singapore 368363 Chiyoda-ku, Tokyo 102-0082 Japan 714.491.1500 +31.33.453.4040 +65.6383.4400 +81.3.3511.7655 www.extron.com Fax 714.491.1517 Fax +31.33.453.4050 Fax +65.6383.4664 Fax +81.3.3511.7656 www.camboard.de Tel. 07131 911201 ce-info@camboard.de © 2005 Extron Electronics. All rights reserved. Fax 07131 911203...

This manual is also suitable for:

Dvs 304Dvs 304 dDvs 304 aDvs 304 ad

Table of Contents