Table of Contents
Advertisement
Chapter 8. Telnet/Terminal Menus
Remote Menu Access
Displays telnet menus for a remote device (may be another ESU/
TDU or any other ADTRAN product that supports telnet via its
EIA-232 chain port). After selecting this option, the user may
choose to connect to a device entered in the Unit Access Table or
enter a unit ID for a unit not in the Unit Access Table. CTRL + X
terminates the session and returns to the ESU 120e Main menu.
MANAGEMENT CONFIGURATION
This menu sets management information, such as SNMP commu-
nity names and trap destination addresses.
SNMP Read Community
SNMP Read Community Name defaults to public. NMSs using
this community name have Read access for all supported MIB
objects but do not have the ability to change MIB objects. This
value must be set to the same value on both the ESU 120e and the
NMS (OpenView®, etc.) in order for the NMS to have Read access
to MIBs supported by the ESU 120e. This value must be a text
string of 16 characters or less.
SNMP Read/ Write Community
SNMP NMS using this community name have full read/write
access to all supported MIB objects (defaults to private). This set-
ting must be the same value on both the ESU 120e and the NMS in
order for the NMS to have read/write access to MIBS supported by
the ESU 120e. This value must be a text string that is 16 characters
or less.
8-4
To access other units external to the ESU 120e (proxied units) us-
ing an SNMP MIB browser, append a period and the unit ID of
the external device to the Read Only and Read/Write community
name used in the MIB Browser, for example public.4. See the Ap-
pendix B, Understanding SNMP for more information.
ESU 120e User Manual
61200420L1-1
Advertisement
Table of Contents
