Chapter 5. Configuration Menu
Base D TE Timed
The DTE is the source of timing. The ESU 120e uses the incoming
DTE clock to determine the transmission timing. This is typically
used in applications where it is necessary to have the DTE as the
primary clock source, (such as limited distance line drivers). See
Figure 5-4.
E1 XMIT
E1 Receive
Figure 5-4. Network Timed Clock Source
5-8
OSC
Network
Interface
Nx56/64
DTE CLOCK
DTE
ESU 120e User Manual
( O PTI O N )
Drop Port
PBX
61200420L1-1