Auth. Fail Traps Sent; Poll Link Status Traps Sent; Ping Ip Host; Telnet/Terminal Timeout - ADTRAN ESU 120e User Manual

Adtran network device model number: esu 120e
Hide thumbs Also See for ESU 120e:
Table of Contents

Advertisement

Chapter 8. Telnet/Terminal Menus

Auth. Fail Traps Sent

(DISABLED, ENABLED: defaults to DISABLED)
When enabled, the ESU 120e issues an SNMP trap when any SNMP
request is received with an invalid community name. Can be used
for security purposes.

Poll Link Status Traps Sent

(DISABLED, ENABLED, defaults to DISABLED)
When enabled, the ESU 120e sends an SNMP trap whenever a
device configured to be polled fails to respond. When the device
begins responding to polls, a poll link-up trap is sent. The format of
the traps are defined in the agent MIB.

Ping IP Host

Allows the user to Ping a specific IP address.
Telnet/ Terminal Timeout
The ESU 120e terminates a telnet or terminal session if no activity is
detected for this length of time. Only one telnet or terminal session
may be active at one time. This timeout prevents an unattended
session from blocking interactive access to the agent. The default
value is five minutes.
Telnet/ Terminal Password
This option allows modification of the password required for entry
into a telnet or terminal session. The default value is ADTRAN.

Exit

Returns to the ESU 120e Main menu.
8-6
ESU 120e User Manual
61200420L1-1

Advertisement

Table of Contents
loading

Table of Contents