Chapter 1. Introduction
ESU 120e Features
The following list describes the standard features in the ESU 120e.
•
A single E1 interface
•
An Nx56/64 data port and G.703 drop port interface
•
Data port supports V.35, EIA-530, V.36 and X.21 electrical inter-
faces
•
An inband communication channel requiring only 8k of band-
width from a single TS0
•
One option slot to house option modules with up to four addi-
tional ports, including voice and data
•
Allows mix of port types to meet the data interface require-
ments.
•
Easy configuration capabilities using simplistic menus dis-
played in a liquid crystal display (LCD) window operated by a
front panel keypad
•
Two programmable configuration maps that define the band-
width allocation between data ports
•
Flash memory for software updates
•
Selectable timing from the network, from the Nx56/64 or drop
ports, internally, or from a secondary interface
•
QRSS; 511 test patterns using Nx option
•
Extensive self-test and monitoring provides assurance of proper
operation
•
SNMP, Telnet, and T-Watch Pro Management via SLIP or
10BaseT
ESU Option Modules
Some of the option modules available for the ESU 120e are:
•
Nx56/64 serial interface. This module provides a V.35 serial in-
terface in either single or dual versions.
•
Router module. Integrated IP/IPX Router with 10BaseT inter-
face.
•
NxIQ. Provides extensive frame relay and monitoring capabil-
ities.
1-2
ESU 120e User Manual
61200420L1-1