Table of Contents
Advertisement
Chapter 6. Utility Menu
Unit ID
This menu is used to access the current Unit ID setting. Viewing is
available in limited access mode. Editing or changing the Unit ID
requires the use of a password as in editing mode. Unit Identifica-
tion numbers must be between 2 and 250. If an out-of-range num-
ber is entered, the unit assumes the upper limit number of 250.
To Set the Unit Identification
In the Unit ID menu (item 4) under the UTIL menu, enter any value
between 2 and 250. The number 1 is reserved for the PC.
Pressing Enter records the Unit ID number and establishes its avail-
ability for operation by remote control. The unit proceeds to the Set
Control Port prompt.
No Unit ID D esired
Without entering any numbers at the Unit ID prompt, press Enter.
Pressing Enter with no Unit ID recorded establishes the unit as not
able to be operated by remote control.
Software Revision (Software Rev)
This menu provides access to the display of the current software
revision level loaded into the base unit controller. This information
is required when requesting assistance from ADTRAN Customer
Service or when updates are needed.
Use Cancel to exit.
6-4
ESU 120e User Manual
61200420L1-1
Advertisement
Table of Contents
