Table of Contents
Advertisement
10 Assembly and installation
10.7 Setting the switching positions
1
1. Press clamping tie bar 1 in with a
screwdriver.
3
4
Setting the upper switching position:
4. Move the valve to the OPEN position.
5. Squeeze and hold red levers 3.
6. Push switch 4 on the toothed bar into the desired position.
7. Release red levers 3.
ð Switch 4 engages.
ð The upper switching position is set.
12. Make the electrical connection (see "Electrical connection", page 20).
GEMÜ 4241
2. Turn the cover anticlockwise to open
the bayonet fitting.
5
6
18 / 27
3. Remove cover 2.
Setting the lower switching position:
8. Move the valve to the CLOSED position.
9. Squeeze and hold red levers 5.
10. Push switch 6 on the toothed bar into the desired position.
11. Release red levers 5.
ð Switch 6 engages.
ð The lower switching position is set.
2
www.gemu-group.com
Advertisement
Table of Contents
