Table of Contents
Advertisement
10 Assembly and installation
10.3 Mounting kit assembly
Item
Name
1
Spindle
2
Spring
3
Operating bush
4
Distance piece
5
O-ring
6
Adapter
* Included depending on version.
Pretensioned spring!
▶ Damage to the device.
Slowly release the tension in the spring.
●
Do not scratch the spindle!
▶ A damaged spindle surface may cause failure of the travel sensor.
1
1. Pull out the spindle 1.
3. Tighten the operating bush 3 by turning it
clockwise.
GEMÜ 4241
Item
Name
7
Flange plate
8
Screws
9
Pressure disc*
10
O-ring*
11
O-ring*
CAUTION
CAUTION
4
2. Align the indentation of the distance piece 4 to the spring and push it over the
spindle 1 using the spring 2 and fix it in place using the operating bush 3.
4. Affix the O-ring 5 and the adapter 6.
14 / 27
1
2
3
5
6
www.gemu-group.com
Advertisement
Table of Contents
