Canon LBP-1210 Service Manual page 32

CHAPTER 1
G Scheduling Tab
Use this tab to schedule a set time for printing, to set printing priorities, and to specify the print
data spooling method. It can be opened by clicking the Scheduling tab in the Properties dialog
box.
The Scheduling tab is shown in Figure 1-7-9.
Canon LASER SHOT LBP-1210 Properties
General Ports
(1)
Available:
(2)
Priority
(3)
Lowest
Current Priority:
(4)
Spool print documents so program finishes printing faster
(5)
(6)
(7)
Print directly to the printer
(8)
Hold mismatched documents
(9)
Print spooled documents first
(10)
Keep documents after they have printed
(1) Always : Keeps the printer ready to print for 24 hours a day.
(2) From / To : Maintains the printer ready to print only during the specified period. When this
button is selected, specific time can be entered in the spin boxes.
(3) Priority : Sets default printing priorities of documents. Documents with high priorities will
be printed before documents with low priorities.
(4) Spool print documents so program finishes printing faster : Sets this option ON to spool
page during printing. Be sure to keep this option ON for this printer. When this option is
ON, option buttons from (6) to (10) become available.
(5) Start printing after last page is spooled : Stars printing after the last page of the docu-
ment is spooled.
(6) Start printing immediately : Starts printing after the first page of the document is spooled.
(7) Print directly to the printer : Submits data directly to the printer without spooling the
data. Be sure to keep this setting OFF, as printing cannot be conducted from application
when it is ON. (When it is set ON, the alert box will appear.)
(8) Hold mismatched documents : Before sending a document, the spooler compares it with
the settings in the printer. If the document does not match to the settings, this item holds
the document in the queue.
(9) Print spooled documents first : Prints the already spooled documents first, even if the doc-
ument being spooled has higher priority than the already spooled documents.
(10) Keep documents after they have printed : Causes the spooler not to delete the already
1 - 24
Scheduling Sharing
Security Select Forms
Always
From 12:00 AM
1
Start printing after last page is spooled
Start printing immediately
Figure 1-7-9
To
12:00 AM
Highest
Browse...
OK
?
X
Cancel