B. External Covers
1. Rear cover unit
1) Open the face-up cover.
2) Remove the two screws and unhook the
two claws.
➂
➀
➀ Face-up cover
➁ Screws
➂ Claws
Figure 3-2-2
3) Unhook the two claws from the bottom
of the printer and remove the rear cover
unit.
➁
➀ Claws
➁ Rear cover unit
Figure 3-2-3
➂
➁
➀
<Note for reassembly>
When reassembling the rear cover unit, be
sure that the retainer for the interface con-
nector with the rear cover unit.
➀ Retainer
➁ Rear cover unit
Figure 3-2-4
2. Right cover
1) Remove the rear cover unit.
2) Remove the screw and unhook the
claw. Remove the right cover.
➂
➁
➀ Screw
➁ Claw
➂ Right cover
Figure 3-2-5
CHAPTER 3
➀
➁
➀
3 - 3