Canon LBP-1210 Service Manual page 28

CHAPTER 1
N Print Processor Dialog Box
In the Print Processor dialog box, you can specify the print processor and spool data type used
for this printer. The Printer Processor dialog box can be opened by clicking on the Print
Processor button in the General tab in the Properties dialog box.
Figure 1-7-5 shows the Print Processor dialog box.
(1)
(3)
(1) Print Processor : Specifies the print processor used for this printer. Normally, Winprint
(Windows standard print processor) is available.
(2) Default Datatype : Displays the list of spool datatype available for the selected print proces-
sor in the Print Processor list box.
(3) Always spool RAW datatype : Click the check box when you want to always spool data as
RAW datatype.
(4) OK : Changes the items in this dialog box and closes the box.
(5) Cancel : Closes this box without changing its items.
1 - 20
Print Processor
Selecting a different print processor may result in different options
being available for default datatypes. If your service does not
specify a datatype the selection below will be used.
Print Processor:
winprint
Always spool RAW datatype
Figure 1-7-5
Default Datatype:
RAW
RAW [FF appended]
RAW [FF auto]
NT EMF 1.003
TEXT
OK Cancel
(4) (5)
(2)